You take your home plumbing for granted until you start having issues. A dripping faucet here, a clogged toilet there, low water pressure somewhere else- plumbing issues can be a real nuisance. You don’t want to wait under the shower due to low water pressure or hear the constant drip-drip of a leaking faucet. Fortunately, you don’t need to run to a plumber every time you face a plumbing issue and fix most problems at home, with the help of simple tools. Here are some plumbing projects that are definitely DIY and can be handled by most homeowners.
Stop a Dripping Faucet
Is the constant drip-drip of a faucet making you lose your mind? A Leaking faucet isn’t just a nuisance, it can waste hundreds of gallons of water if not fixed in a timely manner, and add to your bills. Most commonly, the cause of a dripping faucet is a worn-out O-ring. This is the rubber ring that goes on the stem screw and serves to hold the handle in place. This ring gets worn out with age and need to be replaced also always purchase or orders such products from best plumbing manufacturers companies in Canada or from anywhere you live. If you notice water seeping from the base of the handle. Secondly, a clogged-up aerator can also lead to leaky faucets. This filter at the end of the spigot may get clogged up by mineral deposits, leading to reduced water pressure and leaks. If you have a dripping faucet at home, it helps to replace the aerator and see if that fixes the issue. Last but not the last, there could be a problem with the valve seat and washer that sit between the faucet and the spout. These connectors need to wear out with age and come loose, or even corrode due to mineral deposits. Check to see if the valve seat is firmly secured in place. Without a perfectly positioned seat valve, you will notice a tearing, dislodging or stiffening of the washer, allowing small amounts of water to drip from the faucet.
Fix a Broken Pipe
Do not freak out if a plumbing pipe bursts suddenly. But first things first, it is absolutely imperative to find the main shut-off valve and cut off the water supply and avoid water damage until you find a solution. Once you have stopped the water supply, it is time to fix the pipe by yourself. If your house still has old copper plumbing, expansion and contraction due to sudden temperature changes can break the pipe, as does corrosion with age. The best way to fix a mid-run copper pipe that has sprung a leak is to cut on both sides of the break point and remove the broken piece. You can insert a PEX plastic pipe with push-fit fittings or crimp style fittings.
Stop a Running Toilet
There are many things that can wrong with your toilet. For instance, the bowl may not refill after you have flushed or the toilet may keep running after every flush. If you are experiencing a running toilet, you need to evaluate the fill tube that runs from the fill valve to the overflow tube. If it disconnects or becomes lose, the bowl may not fill up after the flush. Check if the fill tube is securely connected to the valve. If that doesn’t solve the problem, check the float. As the tank refills after a flush, it should lift a float that shuts off the water when it reaches a certain level. A float that is set too high will lead to an overflow every time. If you notice a runny toilet, try adjusting the float to ensure that the fill valve shuts off properly. You may also need to adjust the flapper chain. A chain that’s too short or tangled won’t allow the flapper to close and water will continue to leak into the bowl, while a chain that is too long won’t open the flapper wide enough to stay open for the full flush. Last but not the least, you may need to replace a worn-out flapper. If your toilet keeps running despite all the steps mentioned above, it could be due to a malfunctioning flapper. Install a new flapper immediately and make sure it opens and closes freely.
Fix A Shower Diverter Valve
In older constructions, your bathtub may double as a standup shower. When you turn on your shower and switch the water from the tub to the showerhead, the water should immediately stop pouring out from the tub’s faucet, and vice versa. If not, you probably have a worn-out diverter valve in your shower. A faulty shower diverter valve won’t be able to switch from the tub’s spigot to the showerhead at all. You need to unhinge the faucet, and replace the shower diverter valve before it leads to leakages and dipping.